Steel Tooth Roller 5 1/2″ x 2″ for 35mm keyed shaft
|Dimensions||14 × 14 × 5.1 cm|
Steel tooth feed roller for moulders with 35mm keyed drive shafts.
This feed roller is 5.5″ diameter x 2″ wide, with an aggressive but depth limited tooth pattern to avoid digging too deeply into your material.? The roller provides powerful grip for feeding most wood through a moulder.
If you need a more aggressive wheel try a rough/wet timber rollers.? For a wheel that will not damage your material, try a rubber or urethane roller.
- A primary and secondary tooth work together as a pair, giving the effect of twice as many teeth.
- Hard chromed surface on both primary and secondary tooth patterns, resulting in longer service life
- Sloped gullet improves clearing of chips and reduces surface marking.
Equivalent to Weinig # 340291001
Requires a metric set screw for locking the feed wheel onto the drive shaft, which is sold separately here.